Cut six rectangular pieces of wood on the scroll saw. filigree brass charms. Make two of them sized 6 inches by 10 (for the bottom and top), two sized 10 inches by 2 inches and two pieces sized 6 inches by 2 inches (for the sides of the box).

Wood glue the short pieces to the edges of one of the larger rectangles to form a box with an open top, lining up the side pieces with the edges of the same lengths on the bottom piece. Glue the side pieces to the outside edges of the bottom piece so that the side pieces overlap and cover the bottom when viewed from the sides. Use masking tape to secure the pieces until the glue dries.

Attach the lid using hinges. Lay the box lid over the top of the open box, then lay each hinge so that it folds over corner formed by the box top and the box on one side. lampwork glass beads. Position each hinge 1/2 inch in from the outside edge. Fasten the hinges with the small screwdriver using the screws they came with.

Screw the clasp in place. Attach the eye piece to the front of the jewelry box, positioning it in the middle of the front panel and about 1/8 inch from the edge. Connect the upper hook piece of the clasp to the mounted bottom piece, then see where it lies on the lid while connected. Mark this point with a pencil, then remove the hook piece from the eye piece in order to screw it in place on the lid.

Sand the wood by hand with a medium-grain sand paper. Pay special attention to the inside of the box, especially the corners and any rough spots that might be hard on jewelry. jewelry chains. If necessary, give these areas a second sanding with a finer grain of sandpaper to make them extra smooth.

Stain the wood according to the instructions on the can of stain.

Varnish the wood according to the manufacturer's instructions.

Add a mirror to the inside of the lid using quick-set epoxy. Hold the mirror in place until the epoxy sets.

Select the appropriate size of crimp bead and crimping tool for your project. The size of crimp bead you select will depend on the thickness of the bead-threading jewelry wire you are using. Different crimping tools are designed to fit different sizes of crimp beads.
Take a crimp bead and slide it on to one end of the jewelry beading wire and then add a jump ring. glue in cabochon settings pendants. Take the end of the wire and string it back through the crimp bead.
Move the crimp bead up to meet the jump ring so that it fits snugly together, but is not so tight that the jump ring can't move.
Place the crimp bead that is on the beading wire into the first station, or notch, of the crimping tool. resin Eiffel tower pendants. The first station is the notch which is farthest from the tip of the crimping tool and has a dimple in its center.
Use your fingers to separate the beading wires so that they lie on each side of the crimp bead.
Squeeze the crimping tool so that the dimple in the center of the first station comes down on top of the crimp bead between the two strands of beading wire so that the strands are on opposite sides of the crimp bead. raw brass filigree charms. The crimp bead should now be in a "u" shape.
Move the u-shaped crimp bead to the second station of the crimping tool, which is closest to the tip of the pliers, and squeeze the crimp tool together. The two sides of "u" should fold together.
Begin stringing your beads and other jewelry-designing elements onto your beading wire. Once you have completed your strand of beads, repeat the above steps to secure a second crimp bead to the other end of the beading wire. China Beads Wholesale. Place the second crimp bead as close to the strung beads as you can, leaving only enough slack in the wire so that the beads can move slightly, but not appear loose.
Trim any excess wire from the ends of the crimp beads and secure whatever jewelry fastening device you choose to complete your project.

Many people wonder just how to take care of their silver jewelry. When you first purchased that silver necklace, ring or broach it was shiny and beautiful. In time silver tarnishes from the interaction of silver and sulfides in the air. Here I will give you a brief introduction on how to quickly clean your silver jewelry.
Each time you should give your silver jewelry a quick clean before you wear them. You should make sure that silver jewelry should always be cleaned with a soft cotton or flannel cloth. If you don't have them, you can go to the market to get a a silver cleaning cloth. For quick cleaning of silver, such as removing makeup or light dirt, use a small amount of liquid detergent or soap to about a half cup of warm water. Using your cloth, wipe the solution the jewelry, rinse under clean warm water, and dry thoroughly. If using the toothbrush, scrub gently with the solution and rinse. To remove tarnish or heavier dirt buildup, you will need to use special silver cleaner. Silver cleaners come in both a paste and a liquid form. Liquids are also known as silver dips.
Now that you have all of the silver in your home clean and shiny, what do you do? Enjoy it! Enjoy having beautiful serving pieces and flatware to create an inviting table. Enjoy wearing your shiny jewelry.

About the author: crystal beads digital collage sheets mountings and settings jump rings jewelry chains

In addition to select the style that suits your style, the selection of accessories should also pay more attention to buy real jewels. For example, see all jewelry, if you have something good, if you have a flexible chain. If the pin How to Buy or earrings, people should pay attention to your PIN, if solid.
We neglect necklaces, earrings in our daily lampwork glass beads lives, in fact, these ornaments are easily damaged and require more attention to care. Do not use for bathing, washing or near the laundry, since water vapor can contaminate humidity, especially for complex design jewelry sales of properties are more similar to the gap.
Perfume is very popular among people who caught the second skin for women. However, it may potentially harmful to the decorations. Therefore, people should respect the principle of attrition after the perfume, avoid volatile chemicals remain in the jewelery and quality jewelry gradually change. Hair gel and other styling products can also cause similar damage to jewelry.
Jewelry should be cleaned at regular intervals. They can be soaked in warm water and mild soap and brush gently with a soft brush to remove dirt that products bind to the surface, then wash with water and dry jewelry.
Label products are usually exquisite and aesthetic china beads wholesale interpretation. But if people do not take care of them when used every day, but also lost its luster. Therefore, the most precious jewels, great attention should be given.
For example, gold jewelry, gold, even going to change under certain circumstances. If the use of mercury containing cosmetics or skin care, the gold surface may be resin flower cabochons brown or gray, especially earrings and necklace that are close to the cheek and neck. Silver jewelry is easily oxidized and change color to black. He better wipe cleaning of silver or money to water regularly to keep the surprise. Glass products do not need to pay as much attention as other jewelry. Only people who do not break, there are almost no big problems. If contaminated with oil, try cleaning it with alcohol or mild soap, then dry with a clean cloth.

1) Participate in auctions:
You can find beautiful jewelry auction sale of antiques. You can participate in offline mode or online auction and the opportunity to purchase special items of jewelry passed down from generation to generation.
2) Are you looking for real estate sales:
If you opt for real estate sales, you will find antique jewelry at China beads wholesale prices. Basically, you come across these gems that are sold by small-son, who are not interested in them and treating them like naughty grandmas jewelry.
3) Visit the antique shops:
Move through antique stores and buy antique jewelry you want. Since the store specializes in selling antique jewelry, you will encounter these Tibetan style beads different varieties of jewelry to choose from.
4) Look in the newspaper ad:
Finally, you can also keep an eye on your local newspaper for announcements relating to real estate sales and garage sales. These types of relationships that sales are made ​​by people who do not know the value of the item you are selling. With such sales, you can end up buying antique jewelry for a few dollars that would otherwise cost more to its old value.

Long Nose Pliers. Frequently used in craft production, this type of pliers is essential in bending and shape forming for jewelry making. The downside to this though is that we can't apply force since the shape of this tool is tapered.

Flat Nose Pliers. This is the most common type of pliers in the tool shed which is mainly used for gripping objects with great compression loads. Usually flat nose pliers come with a wire cutter that has the same function as a lineman's pliers. The disadvantage of this type of pliers is in gripping objects with slim spaces. There is more of a brute force than finesse.

Cutting Pliers. Actually this type of pliers does not belong to the plier's family as stated in its early uses, but the form and concept is basically the same. This type of pliers is used for cutting and stripping wires, which is one of the most useful electrical tools.

Crimping Pliers. This particular type has the most variety. Crimping pliers are used to join or seal two things together. The most common uses for these pliers are for industrial use, but they come along with a costly price tag.
Round Nose Pliers. Also a critical partner in craft making, round nose pliers are used for creating round shaped wires for earrings, necklaces and bracelets. This type of pliers is the same as the long nose pliers, and offers the same disadvantages.

About the author: Zacoo is one of leading online China beads wholesale shop from China that features a wide range of quality beading supplies at the best wholesale price. Welcome to this website and choose cheap acrylic beads, Tibetan style beads, vivid resin flower cabochons and many more jewelry making supplies.

Bring some cool color to your winter and make this resin flower bracelet! In this cold winter, when you want to keep a fun and summer spirit, then this resin flower bracelet bringing you a vivid summer feeling is the right choice. Vivid resin flower cabochons matched well with iron rollo chainscreate this perfect seasonal style. A color combination of white, green and pink add texture as well as elegance to these treasures.

Be ready to shine at your next winter party with this cool bracelet, and read my jewelry blog to find more beading inspirations, and jewelry making tips.

Source from: http://www.webeads.com/resin-flower-bracelet/

The Thomas Sabo charms, also named as clip on charms or charm beads, are one of popular charms among girls. Featured with exclusive look and specific style, clip on charms meet young girls’ need. They like to wear clip on charms jewelry on casual or official occasion.

There are many of thousands of designs of such charm beads, which is the miniature of everything in the life. So you could select an umbrella, a pair of shoes to dance on your wrist. Or you could collect the Eiffel Tower or other famous building. The clip on charms jewelry is good for wearing.

Clip on charms also famous for its another features, which is easy come and easy go. Wholesale beads China shop-Zacoo’s clip on charms, which are either in enamel or rhinestone embellishment, are all featured with a lobster clasp, so you can change the charms everyday according to your mood and your taste. Purchasing some Thomas Sabo charms can be also as a prefect gift ideas.

Source from: http://www.beadinfashion.com/clip-on-charms-features/